How to Make Your Own Dish Antenna From Just Household Parts

Are you tired of paying for cable or satellite TV? Do you want to watch your favorite shows and movies for free? If so, then you need to learn how to make your own dish antenna.

How to Make Your Own Dish Antenna from Just Household Parts

by Sarah Susanka

4.2 out of 5

Language	:	English
File size	:	221 KB
Text-to-Speech	:	Enabled
Enhanced typesetting	:	Enabled
Word Wise	:	Enabled
Print length	:	5 pages
Screen Reader	:	Supported

FREE

Making your own dish antenna is a relatively easy and inexpensive project that can be completed in a few hours. With just a few household parts, you can create an antenna that will allow you to receive free over-the-air TV signals.

Materials

To make your own dish antenna, you will need the following materials:

• A large metal dish (such as a satellite dish or a metal pie plate)
• A length of coaxial cable
• A TV antenna
• A screwdriver
• A pair of pliers

Instructions

Once you have gathered all of your materials, you can follow these step-by-step instructions to make your own dish antenna:

1. Prepare the metal dish. If you are using a satellite dish, you will need to remove the LNB (low-noise block) from the dish. If you are using a metal pie plate, you will need to clean the surface of the plate to remove any dirt or grease.
2. Mount the TV antenna to the metal dish. Use the screwdriver to attach the TV antenna to the center of the metal dish. Make sure that the antenna is pointing straight up.
3. Connect the coaxial cable to the TV antenna. Use the pliers to crimp the coaxial cable to the terminals on the TV antenna. Make sure that the cable is securely attached.
4. Run the coaxial cable to your TV. Connect the other end of the coaxial cable to the antenna input on your TV.
5. Scan for channels. Use the remote control to scan for channels on your TV. Once the scan is complete, you should be able to watch free over-the-air TV.

Tips

Here are a few tips for getting the best results from your DIY dish antenna:

• Use a large metal dish. The larger the dish, the more channels you will be able to receive.
• Mount the dish in a clear area. The dish should not be obstructed by trees or buildings.
• Point the dish towards the nearest TV transmitter. You can use a compass to find the direction of the transmitter.
• Use a high-quality coaxial cable. The quality of the cable will affect the signal strength.
• Be patient. It may take some time to find the best position for your dish.

Making your own dish antenna is a great way to save money and watch your favorite shows and movies for free. With just a few household parts and a little bit of time, you can create an antenna that will provide you with years of entertainment.

How to Make Your Own Dish Antenna from Just Household Parts

by Sarah Susanka

4.2 out of 5

Language	:	English
File size	:	221 KB
Text-to-Speech	:	Enabled
Enhanced typesetting	:	Enabled
Word Wise	:	Enabled
Print length	:	5 pages
Screen Reader	:	Supported

FREE